เครื่องตัดสายอัตโนมัติhttps://sale.kelenor.co.th/index.php?route=product/category&path=216

เครื่องตัดดิจิตอล F-913

New Products
จำนวน:    
   - หรือ -   
 
 

เครื่องตัดเทป ZCUT-9 YAESU




รหัสสินค้า: M-2465737450
ดู: 3,654 ครั้ง
แบรนด์: Bojin

สินค้าในสต๊อก:

จัดส่งได้ภายใน 2 ถึง 3 สัปดาห์

ราคา: 77,811.00 บาท

ติดต่อผู้ขาย
ต้นกำเนิดสินค้า: China
การบริการและรับประกัน: สินค้ารับประกัน 90 วัน นับจากวันที่ได้รับการสั่งซื้อ
นโยบายการคืนสินค้า : รับคืนสินค้าหากไม่ตรงตามคำอธิบาย ผู้ซื้อรับผิดชอบค่าส่งคืน หรือเก็บสินค้าไว้และติดต่อรับเงินคืน จากผู้ขาย
คืนเงินจำนวนเต็ม : หากไม่ได้รับสินค้า



เครื่องตัดเทปอัตโนมัติ F-913, เครื่องตัดเข็มขัด, เครื่องตัดทองแดง, เทปเครื่องไฟฟ้าตัด
ความเร็วสูงที่มันสามารถตัด 100 ~ 120 ตัดต่อนาที (ยาว 50 มิลลิเมตร)
ทำงานอัตโนมัติเท่านั้นโดยการตั้งค่าความยาวและปริมาณจำนวนที่ต้องการตัด
หน่วยความจำ: ป้อนความยาว และความเร็ว  
แอพลิเคชัน: เส้นใยไนล่อนริบบิ้นเชือก,สายพาน, หนัง, ไนลอนซิปกระเป๋าเข็มขัด ฯลฯ
ความเร็วสูง ความแม่นยำสูง
ข้อมูล
ความกว้าง: 5 ~ 140 มิลลิเมตร
ความยาว: 1 ~ 99999 มิลลิเมตร
ความเร็ว: 120 ชิ้น/ นาที
ความแม่นยำ: ± 0.1mmBlade
กำลังไฟฟ้า 50Hz AC220V

การตั้งโปรแกรม เครื่องตัด F-913
*การตั้งค่าเริ่มต้น + และ –  เพื่อสำหรับโปรแกรม
ใช้ A= 1 การตั้งโปรแกรมการตัด การตั้งโปรแกรม ให้กด + หรือ – ให้แสดงค่า เลข 1 ในช่อง A  ช่อง BCDE เป็นหน่วยค่าความยาว ของชิ้นงานที่ต้องการตัด
เช่น A=1  ,B=0 ,C=0 ,D=1  การตัดความยาว 1 มิลลิเมตร

*การตั้งค่า จำนวน การตัด A=2 ใช้ในการตั้งค่า จำนวนที่ต้องการตัด
เช่น A=2  ,B=0 ,C=0 ,D=10  จำนวนที่ต้องการตัด 10 ชิ้น

*การตั้งค่า ปริมาณการตัด A=3 ใช้ในการตั้งค่า จำนวนที่ต้องการตัด
เช่น A=3  ,B=0 ,C=0 ,D=100  การตัด 100 ชิ้น
การตั้งโปรแกรมทุกๆ ให้ใส่ค่า ENT หลังจากตั้งเสร็จ
กด RUN and STOP Machine
MAN QUI ปรับเลื่อนด้านชิ้นงาน
ย้อนกลัง ให้ยกลูกกลิ้ง

Features:
1. Easy Operation,It can cut automaticlly once set up the cutting length and quantity.
2.Self protection Function,It will stop automaticlly if the materials run out during the operation.
3.High speed,it can cut 100-120pcs per minute(50mm length for example)
4.High Accuracy,the cutting length is accurate cwing to a stepping motor.
5.Application: Woven belt, nylon buckles, lining, fabric tape without heat seal , plastic zipper, metal zipper, plastic lace,PVC tube  leather, aluminum platinum, PS material and so on.
We supply kinds of special blade,then you can get different shapes of cutting edge.
Label cutting machine BJ-02
Suitable for below material:
Braided belt, nylon buckle, lined, no heat sealed webbing, plastic zippers, laces and so on.
This control has five digital display, six key operation
A:
5 A digital display A B C D E
Which the rightmost digital tube A Represents the parameter number, Left four digital tube B C D E representing parameter values
Parameter number A=0 , B C D E Value is speed, Can set.
Parameter number A=1 , B C D E Value is the length of the preset values, you can set
Parameter number A=2 , B C D E Value is piece preset values, you can set
Parameter number A=3 , B C D E Is piece of numerical values, display now cannot be set
Such as digital display 1 1 2 3 4 Mean length of the preset value is 1234 Mm 。
Such as digital display 2 0 5 6 7 Mean piece-preset value is 567 A
 
Second:
6 A key operation plus Reduced settings confirm /0 Kai / stop manual /K
Is not in the set state i.e. parameter number A Does not Flash, Press plus or reduced key parameter number cycle display,
 Settings: press Plus or reduced key parameter number cycle show, to set a parameter, press the plus or minus key to display
To set the parameter number, then press the set the parameter number A Flashes, then press Plus or reduced key change
Parameter value, in accordance with Or reduced key while pressing the manual /K set speed faster, reach the predefined settings, press
Confirmation /0 The parameter number A Stop blinking, this parameter is set to end.
Manual: not in the set state i.e. parameter number A Not flashing and the stop State, according to the manual /K Manually pull belt
Forward to release the stop.
Zeroing: not in the set state i.e. parameter number A Not flashing and the stop State, parameter number A=4 , Press
Confirmation /0 The piece count zero.
Commitment: do not set the status that is, parameter number A Not blinking, press the restart / Stop entering work automatically,
Then restart / Stop you cut out the last stop.
操作说明书

本控制有五个数码管显示,六个按键操作
一:
5个数码管显示 A  B C D E
其中最右边的数码管A代表参数号码, 左边的四个数码管B C D E 代表参数值
参数号码A=0时, B  C  D  E 的数值是速度,   可以设定。
参数号码A=1时, B  C  D  E 的数值是长度预设值,可以设定
参数号码A=2时, B  C  D  E 的数值是计件预设值,可以设定
参数号码A=3时, B  C  D  E 的数值是计件现在值,显示用不可以设定
比如数码管显示1  1 2 3 4 意思是长度预设值为1234毫米。
比如数码管显示2  0 5 6 7 意思是计件预设值为567个

二:
6个按键操作加 减 设置 确认/0 启/停 手动/K
不在设置状态即参数号码A 不闪烁, 按 加 或 减 键参数号码循环显示,
 设置:按 加 或 减 键参数号码循环显示, 要设置某个参数时,按加或减键显示
要设置的参数号码,然后按设置则参数号码A 会闪烁,这时按 加 或 减 键改变
参数值,在按加 或 减 键同时按手动/K则设置速度会加快,到达预设置后,按
确认/0则参数号码A停止闪烁,此参数设置结束。
手动:不在设置状态即参数号码A不闪烁,且在停止状态时,按手动/K手动拉带
前进,松开则停止。
清零:不在设置状态即参数号码A 不闪烁,且在停止状态,参数号码A=4时,按
确认/0则计件数清零。

启停:不设置状态即参数号码A 不闪烁,按启/停进入自动工作,
再按启/停则切完最后一个停止。



เครื่องตัดดิจิตอล F-913 เครื่องตัดดิจิตอล F-913

ถาม & ตอบ

ไม่มีการโพสต์คำถามเกี่ยวกับผลิตภัณฑ์นี้.



Sort By:

ความคิดเห็นเกี่ยวกับตัวสินค้า  



0.0 คะแนนเฉลี่ย
จากรายการรีวิวทั้งหมด 1 รายการ



ชื่อ:


เขียนความคิดเห็นของคุณ:
Note: HTML is not translated!
รูปภาพ (Upload Multiple images) :
Upload Images

Review Images Delete

วีดีโอ (Enter Youtube video link) :


ให้คะแนน: น้อย         




การชำระเงิน


กรุณาโอนเงินเข้าบัญชี ธนาคาร กสิกรไทย สาขา คลอง 6 ธัญบุรี

ชื่อบัญชี บจก.เคเลนอร์ เลขที่บัญชี 416-264-7569

โปรติดต่อฝ่ายขาย 094-3249624 ก่อนการโอน
เลขที่ 4 หมู่ที่ 26 ตำบลคลองหก อำเภอคลองหลวง จังหวัดปทุมธานี 12120
วันจันทร์- เสาร์ เวลา 8.00-17.00 น.

  หมายเลขอ้างอิง:  

HHH

  ความคิดเห็นของลูกค้า:   0 ความคิดเห็นสาธารณะ   0 ความคิดเห็นสาธารณะ
  อันดับสินค้าขายดี:   ยอดขาย:
  หมวดหมู่:   เครื่องตัดสายอัตโนมัติ
  ขายสินค้าเมื่อ:   2018-03-10 19:42:08
  วันที่แก้ไขสินค้าล่าสุด:   2024-03-28 17:57:41


X

Capacity: 200 GPM – 2000 GPM
Pressures: 40 – 355 psi
Maximum Working Pressures: 290 to 395 PSI
Speed: 1480,1760, 2900,2980, 3000 RPM
Dynamically Balanced Impeller extends bearing life and ensures smoother operation.
Designed and built as per UL 448 AND NFPA20 for maximum reliability.
Constructed in variety of metallurgies.
Available in 50 Hz and 60 Hz.
Drivers with gear boxes at electric and diesel speeds.
Designed for easy maintenance without interfering with piping.
Open line shaft, water lubricated construction for ease of maintenance.
Self-Venting Design eliminates vapor lock and the need for automatic air release valve

ประตูน้ำเหล็กหล่อ : ลิ้นยกแบบรองลิ้นโลหะ สำหรับงานประปา CASR IRON GATE VALVE – METAL SEATED FOR WATER SERVICES MODEL (DN-CI-MS) TIS 256 PN 6, 10, 16 TIS 432 PN 6, 10, 16 DIN 3352 PN 10, 16 BS 5150 PN 6, 10, 16 BS EN 1171 PN 6, 10, 16 Size DN80-1200 mm. ประตูน้ำ (Gate Valve) เหล็กหล่อใต้ดิน ชนิดลิ้นยกแบบรองลิ้นโลหะ มอก.256 ประตูน้ำ (Gate Valve) เหล็กหล่อใต้ดิน ชนิดลิ้นยกแบบรองลิ้นโลหะ สำหรับงานประปา มอก.256 วาล์วได้ผลิตและทดสอบตามมาตรฐาน BS 5150 PN10/16/25, BS EN 1171:2002, BS EN 1074-2, TIS 432 PN 6 / 10 / 16 และสอดคล้องกับข้อกำหนดของ MSS-SP-70 class 125 / 250 ใช้งานได้กับทั้งน้ำ, อากาศและไอน้ำ ตุณลักษณะ - ตัวเรือนเป็นเหล็กหล่อ - ปลายประตูน้ำ สามารถเป็นหน้าจาน, เกลียวและปลายเรียบ - หน้าจานสามารถเจาะให้เข้ากับ ANSI B16.1, ANSI B16.5, BS4504, BS10, BS EN 1092-2, BS 4772, AS2129, DIN, JIS และอื่น ๆ - เลือกตัวขับได้หลากหลาย ตามที่ต้องการเช่น พวงมาลัย, แป้นประแจขันหรือ cap, พวงมาลัยโซ่, เฟืองตรง, เฟืองดอกจอก, นิวเมติก, ไฮดรอลิก และไฟฟ้า




Fire Pump Controller UL FM standard for Jockey Pump Type You have decided to reduce the risk of fire damage to your facility by installing a UL, ULC listed fire pump system. Your next decision is which system to purchase. You want a fire pump that is proven in installations worldwide. Manufactured by an professional with vast experience in the fire protection field. You want complete service to field start-up. You want a Engine Controller Fire Protection UL FM Providing Pumping Solutions TONGKE Can Fulfill Your Requirements: Complete in-house fabrication capabilities Mechanical-run test capabilities with customer furnished equipment for all NFPA standards Horizontal models for capacities to 2,500 gpm Vertical models for capacities to 5,000 gpm In-line models for capacities to 1,500 gpm End suction models for capacities to 1,500 gpm Drives: electric motor or diesel engine Basic units and packaged systems.




สินค้าที่คุณเคยดู

Related


Facebook Comments ()

25

kelenor.co.th        JshopDL.co.th        Wallmart.co.th        Alizonna.com        sale.kelenor.co.th
Joyomart.com        kelenorsale.com        kelenor.net        Jshopdl.net        Jshopdl.com        kelenorsolar.com
kelenorpower.com        Jshopdl.info        bluewallmart.com        blackwallmart.com        wallstores.net        texwallmart.com        texwallmart.net
JshopDLit.com        kelenorit.com        kelenor.info        kelenor.cc        kelenorfire.com        kelenortable.com        jshoptable.com        JshopDL.cc